1. Cable Insulation
(Shinkansen bullet train)
2. Wire & cable applications
3. Shaft seals
4. Off-shore applications

Aflas® is a range of copolymer (tetrafluoroethylene and
propylene) and terpolymer (TFE, propylene & vinylidene fluoride)
fluoroelastomers.

Aflas® compounds are designed for applications requiring
good heat resistance, chemical resistance (particularly to bases
and amines) and electrical insulation properties. Typical applications
are in the automotive, wire and cable, off-shore, and chemical industry.


This information sheet contains typical property data which should not be
used for specification purposes.

Aflas® Grades
Grade Structure

SG
(raw gum)

Fluorine
Content (%)
Mooney Viscosity
ML1+10(100º)
Tg
(ºC)
Cure
System
Applications
300S TFE/P 1.55 57 106 -3 Peroxide

White base resin
General seals
Extrusion          

100S TFE/P 1.55 57 160*
-3
Peroxide High strength seals, gaskets
100H TFE/P 1.55 57 110*
-3
Peroxide High strength seals, gaskets
150E
TFE/P
1.55 57 60
-3
Peroxide Extrusion, tube, wire & cable
150P TFE/P 1.55 57 95
-3
Peroxide General, seals
150CS TFE/P 1.55 57 130
-3
E-BEAM Extrusion, tube, wire & cable
150C TFE/P 1.55 57 100*
-3
E-BEAM Extrusion, tube, wire & cable
* False Mooney value due to rotor slippage
* A small amount of VdF used as a cure site monomer

Typical Formulation 100/150
Cure Conditions
100/150

Typical Formulation
300 Series

   
Typical Cure Conditions
 
Polymer
100
 
Press Cure at 170ºC for 20mins
 
Polymer
100 (phr)
 
Press cure at 170º C for 20mins
MT Carbon
25
 
Post Cure at 200ºC for 4hrs
MT Carbon
25
 
Optimum Post cure at
230º C for 16hrs
Ca(OH)2
-
 
   
MgO (high activity)
0.2
MgO
-
 
   
TAIC
5
       
TAIC
5
 
   
Perkadox 14
1
       
Peroxide
1
 
   
       
Sodium Stearate
2
 
   
       
 
 
       
TAIC - Triallyl Isocyanurate
     
Peroxide - 1,3 bis(t-butylperoxy) - diisopropylbenzene
       
Aflas® is a trademark of Asahi Glass Company
Tel: +44(0) 1253 861963 (sales office) Fax: +44(0) 1253 861950
e-mail: info@agcce.com www.agcce.com